Planned obsolescence in cycling

You are reading a single comment by @kjlem and its replies. Click here to read the full conversation.

•

kjlem

Because of the adapter there is no step anymore, it's basically a straight 24mm spindle. So the axial loads are now shared between the 2 bearings, like with Shimano cranks.
And apparently the bearing quality of Shimano is better too.

•

Kimmo in reply to @kjlem

Because of the adapter there is no step anymore, it's basically a straight 24mm spindle. So the axial loads are now shared between the 2 bearings, like with Shimano cranks.

This sounds like a GXP BB being used with a HT2 crank.

... Just realised, this is a fair old derail here, lads

About

Avatar for kjlem @kjlem started