• Few bits that have been knocking around

    Brooks Swift Ti - Green

    Boxed with all of the bits plus polish and proofing. The tension bolt snapped and I stopped using it about 4-5 years ago.

    Needs a new tension bolt £8 on the Brooks website
    https://www.brooksengland.com/en_uk/tension-pin-assembly.html

    £60

    TRP CX8.4 - bought as a pair from @Giubis as I needed 1 for my Brooklyn. Would suit a left hand brake as the noodle / clamp is on that side.

    £35

    Royce Track hubs laced to TB14s, front rim is Pringled as I was hit by a car, tbh the rim was almost dead anyway as it had been used for a while. Rear is fine and true, rear never braked on….photos to come for this as I need to clean them up.

    £140

    CK baseplate 1 1/8

    Bought for my Brooklyn, installed on the fork but was slightly too big so knocked back off and something else was bought. Marks to the underside of the plate while removing.

    £10


    8 Attachments

    • IMG_1637.jpeg
    • IMG_1636.jpeg
    • IMG_1635.jpeg
    • IMG_1634.jpeg
    • IMG_1632.jpeg
    • IMG_1631.jpeg
    • IMG_1630.jpeg
    • IMG_1633.jpeg
About