You are reading a single comment by @Chug_It_Mk2 and its replies. Click here to read the full conversation.
  • Been a while since I've been here, the artist formerly known as Chug_It, brother of the infamous AFDS..

    I'm building a Neutrino up having wanted to downsize from my AWOL that served me extremely well over the last few years.

    Frame was bought new, as were the hubs and a couple of bits. Everything else has been sourced from eBay and the plan is complete the bike from eBay / second-hand / As New alone. I'm going for overbuilt but light which might be an oxymoron.

    Really enjoying building this up, including getting back to the basics of wheel building. Really chuffed.

    Frame: Neutrino in large
    Bars: Nitto
    Barends: Sim Works 22.2mm Sim Drops (Between you and me)
    Stem: Velo Orange
    BB: Sram
    Cranks: Sram Force
    Derailleur: Sram Force short cage
    Chain: Sram 10-speed
    Chainring: Superstar components
    Pedals: Cult plastic
    Rotors: Sram 160mm
    Calipers: BB7 Avid (en route)
    Levers: Avid
    Shifter: Microshift 10-speed RH
    Grips: generic track rubber
    Wheels: (front) Hope Pro 4 laced 3-cross to a generic 36hole double wall (rear) Halo laced 3-cross to a Oddysey 7KA. Halo spokes, brass nipples.
    Cassette: Sram 10-speed
    Tyres: United direct 2.1
    Seatpost: Promax 400mm
    Seat: Brooks C17
    Spacers: lots of carbon


    5 Attachments

    • 9.jpg
    • 7.jpg
    • 1.jpg
    • 2.jpg
    • 5.jpg
About

Avatar for Chug_It_Mk2 @Chug_It_Mk2 started