-
• #2
Rotor 24mm or 30mm axle?
Do you have the tool to install these on the cranks?
-
• #3
Heya this is the newer Rotor crank system. Crank arms are the Vegast or Aldhu types, in various versions.
The spider spline is the same for both 24mm and 30mm axles. You only have to match the crank arms with the axle (Aldhu24 with a 24mm axle, and the Aldhu 30mm version with 30mm axle etc..)
Assembly is a doddle, no special tools required. The spider sits on a DS flange of the axle, the DS arm is then fixed on top of this with a 10mm hex key, this clamps down the spider onto this flange which fixes it in place. The NDS arm is then fixed to the other side and has bearing preload ring.
It’s a great system and I have 2 sets of them myself.
-
• #5
Is it 4 bolt or 5 bolt?
-
• #6
Refer to picture. It’s 5 x 110bcd, standard road compact BCD
-
• #7
I’ll take it! Send me a DM if still available?
-
• #8
SOLD!
I’m selling my trusty Power2max NGeco power meter, after buying this new in 2020 I’ve upgraded to power meter pedals so have no use for this. Works perfectly and have just updated this to the latest firmware. This model is known for being rock solid reliable and accurate and the whole time I’ve had it, I’ve never had any issues with it.
Comes with the original box and some spare batteries. Battery life is actually quite good at 300-400hrs. Just add a pair of Rotor crank arms, axle and some chainrings and off you go
Asking £200 and can post for a £5. Pickup Elephant and Castle or around Warren St during business hours