This should be pretty quick project as its almost there. Pervious owner fitted disc tabs and got cable routing brazed on.
Plans are replace the S/S setup with XT 11 speed (ordered) while retaining the chainset.
New tyres, I want to use René herse 52mm but if that doesn't fit I'll go down to 42mm. I have some 60mm Berthoud guards that I haven't used from my roberts (didn't fit) so I hope I can use them.
Provably swap out the finishing kit with some silver Thomson and carbon xc bars.
Should be turning up later today.
1 Attachment
@Fbrig started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
This should be pretty quick project as its almost there. Pervious owner fitted disc tabs and got cable routing brazed on.
Plans are replace the S/S setup with XT 11 speed (ordered) while retaining the chainset.
New tyres, I want to use René herse 52mm but if that doesn't fit I'll go down to 42mm. I have some 60mm Berthoud guards that I haven't used from my roberts (didn't fit) so I hope I can use them.
Provably swap out the finishing kit with some silver Thomson and carbon xc bars.
Should be turning up later today.
1 Attachment