You are reading a single comment by @hugo7 and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
hugo7
Mr_Smyth
Short answer is yes, if you search for M5 Standoff Spacer on eBay etc you can get various stand-off lengths with an M5 bore. The tricky bit can be finding the correct outer diameter.
Top hat sections can be harder to find. I usually have to get these made and it’s expensive.
You may be able to 3D print something if it’s just locating the screws and not load bearing. Also search for 8mm brass or aluminium tube with 5mm bore and cut to length.