You are reading a single comment by @kvragu and its replies.
Click here to read the full conversation.
-
There's a longer Busch and Muller bracket that I used, because my fork didn't have a mount in the front of the fork crown but below it. I had to piggyback on one long bolt for my mudguards, light mount and a small P-clip to hold some dynamo wire so it didn't hang loose.
I'll try and find some before and after pictures of when I used the shorter vs the longer mount for comparison! But between then, here's the link: https://www.sjscycles.co.uk/lighting-spares/busch-muller-light-bracket-for-lumotec-oval-iq-fly-long/
And here's the bike as it looks now, in the interim.
vthejk
@kvragu
Is there a tall and long fork crown mount that might help the upside-down Edelux sit over the tyre? No front rack, handlebars are busy with a bag, only two mid-fork mounts and the crown. I don't like the mid-fork mounts because the bumpy road forces would seem to unwind the bolt, and I'd be getting a lot of tyre in front of the beam.