You are reading a single comment by @Galpino and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Galpino
The picture on the website shows the hanger being attached to the outside of the frame meaning the thicker part then sits under the frame.
My broken hanger in the picture is flat to the ground and the thicker part pointing upwards. It fits on the inside of the frame, so on the underside that you can't see, the bolt holes are chamfered to take the screws. The thicker part then fits under the frame.
So I believe the website to be correct for Wheels No.1.
The PILO D438 is the correct orientation for what I need, but if you look the thicker part squares at the top rather than following the curve of the flat part as the Wheels one does meaning it won't fit my frame unless you machined it down to match the curve.