Road/Track/Misc stuff - Cinelli x Mash Bullhorns, Vision TT brakes, Deda Low Rider Bullhorns, BBs and more

[SOLD] Cinelli x Mash Bullhorns - £25
40cm. Some marks from the previous owner - looks like bartape residue galvanised the anodizing in a few spots. I touched them up with a black Sharpie and wiped away. Hard to see in the pic. The MASH logos on the horns are also a bit scuffed, but would normally covered in bar tape.

Deda Elementi Crononero Low Riders - £15
42cm. A bit scuffed near the centre, some marks on the side, but good.

Vision Trimax Aero TT Brake levers - £30
Used sparingly, still have the inners. Some marks from being put against a white-painted wall

[SOLD] [NEW] Elite/M.Part 1 1/8" threadless headset silver - £20
Paid more for this than I should have, oh well.

[NEW] Deda Quill to A-Head Stem Adapter (1") - £10
It is new, but was put into my frame for testing, so might have a tiny mark or two and defo some copper grease. Never been ridden as it ended up not being needed.
See the specs here: https://www.condorcycles.com/products/deda-quill-to-a-head-stem-adaptor?variant=12521459679315

Cnata 18t Freewheel - £5
Light usage and wear, I believe it's 1 1/8" as that's what I ordered.

Shimano BB-R60B Hollowtech II, Italian threaded 68/70mm - £5
Used but runs smooth

VP VP-BC73T - Square Taper JIS, BSA, 110.5mm - £FREE
Feels rough but it's free if you need a quick BB.

Tifosi Carbon Shell - Square Taper ISO, Itian threaded 70mm, carbon shell - £5
Some rough threads but works fine. Not the right spec for my cranks otherwise I would've used it because carbon!

Tange 1" Threaded headset - £5
Used, some marks, bearings run smooth though

More stuff to add as my clearout proceeds.

Pics...

Cinelli x Mash Bullhorns

Vision Trimax Aero brake levers

Deda Crononero

M Part/Elite 1 1.8" headset

18t Freewheel

Bottom Brackets

Deda Quill-to-Ahead adapter [EXAMPLE PIC]

Tange 1" threaded headset