You are reading a single comment by @Nef and its replies. Click here to read the full conversation.
  • I’m sketch as fuck and I wouldn’t. But if I did, I’d pop a strap around the fork and through the back of the rack. Just in case like.
    If the spacer was a bit, lot thinker, like a bit of steerer or something I’d probably do it.

  • The spacer is an m6 stainless bolt. The brass bit is over the bolt, and is sandwiched between washers as the bolt isn’t threaded all the way along - if that makes sense?
    So even if the brass fails, the rack would still be attached by the bolt, which goes all the way through the fork.

About

Avatar for Nef @Nef started