SOLD - Used Shimano Ultegra 11spd hydraulic shifters (R8020) with Hope RX4+ flat mount callipers

Quite well used set of 11 speed shifters. They were second hand when I got them (getting anything new in Covid was a nightmare) & served me well over ~8,000 miles before I swapped to 12 speed after the front shifting broke & my bike fell over & bent the derailleur in the alps.

The good:

• Braking has been pretty flawless.
  
• Brake pads are pretty new.
  
• Callipers are very pretty.
  
• Rear is still connected & bled (hose length for a 58cm frame with 130mm stem, so quite long).
  
• Can chuck in a part-worn 11-28T cassette also.
  
  

The ugly:

• Shifting mechanism for the front derailleur is broken (can be removed to save weight), so only appropriate for 1x (unless you can find a donor mechanism bit).
  
• Rear brake calliper pad retention pin has snapped on one side. No play in the brake pads though, think it would be pretty hard for them to eject themselves. I've had this happen on another set of RX4 brakes & it's not been an issue.
  
• Some aluminium corrosion on front brake calliper.
  
  

All that in mind, does £90 SOLD posted sound reasonable? Let me know if I'm way off the mark.

3 Attachments

Hi, provisional dibs please! I'll message you regarding the rear brake pads in a mo'