You are reading a single comment by @rhb and its replies.
Click here to read the full conversation.
-
99% sure my Dia Compe Gold finger are also short pull. Is that right?
Yeah.
Also is SRAM pull ratio consistent across their range
No, but everything has something like exact actuation, 1:1 actuation or X actuation on it, although these are very similar, they're not the same, but if it has the same words it's compatible with anything else that says the same.
-
Be wary, you may end up needing a massively long stem to make it work, it may need 30-40mm longer due to the back sweep.
Have a look at Ritchley Buzzard, it will keep stem at a reasonable length (I went from 110mm on the Geoff to 50mm on thr Ritchley)
Lastly, just get a pair of Shimano MT200.
snottyotter
edscoble
@rhb
Thinking of flat barring my latest version Kaffenback as I'm not enjoying drops on it plus I could frankenbike it with the Geoff bar for more bikepacking space. Questions:
Brakes: The brakes are Rever MCX2 (or Havit as PX rename them). These are short pull road brakes. I'm 99% sure my Dia Compe Gold finger are also short pull. Is that right?
Gears: Also is SRAM pull ratio consistent across their range, meaning the 11sp Rival shifter could be swapped for their s-series thumb shifter?
If that'd all work this is a v.low cost + spares box swap so would be ideal. Thanks.