You are reading a single comment by @konastab01 and its replies.
Click here to read the full conversation.
-
You can buy a mcalpine euro to normal adaptor.
The main issue there is the waste is so high up the wall. Personally Id buy a new trap and strip all that out and use a mix of solvent glue and that mcalpine elbow coming out the wall. The washing machine doesnt need to be running at an angle and will pump away when on so I wouldnt worry about a little water sitting in it.
konastab01
It’s not too hard to fix / replace.
You could replace the whole lot with something like this
But:
1) I think the grey stuff is euro thread, so if you replace the trap you’d also need to replace the sink drain bit, or buy an adaptor.
2) it should be possible to just replace the hose.
Then the washing machine waste is straightforward if you can reach it - find out how long it is, buy a new one the same, detach old, reattach new.