FS: various bits

First up...

Front wheel. Dura Ace 1380. Very well used but still going strong. Tubeless conversion with some of that sealant made from crushed olives. The side walls have maybe got another 1000 miles left so try not to brake!!

One slight ding which I used to notice but I think the brain got used to it.

Therefore comes with tire (gp5000 TL also well used but has life).

£40 posted ONO and it's a good idea to top the pressure up every ride or few... I think I top up every 200 miles and it holds pressure well.

1 Attachment

Next up: Specialized Carbon Aerofly handlebars 44cm.

Some chipping on one corner of the paint. I applied laquer here about 4 years ago and it remains intact. Which is a good thing.

One mark underneath which looks like a superficial scratch. Always torqued to spec so no (heavy) indentations from the stem or lever clamps. There is however light intendation on the front of where the stem clamp went and it's superficial.

Also, if you look at one side of the stem clamp area there is a tiny groove inside the paintwork. This will have been caused due to me using a dremelled down clamp for my Exposure mount.

Priced accordingly at £50 posted. Feel free to make a near offer and poorly comments as you wish. Pics incoming as soon as I get the IMGUR app working.

Here we go...

(https://i.imgur.com/DB1AK9n.jpg)

PM’d for the bars

Thanks. I'll reply in a bit. Will pop the levers and stem up whilst I'm on a bit of a roll..

Thanks, do you have the two little gubbins for where the hoses come out the bars? Can’t mind their proper name!

Yes, I know what you mean. Don't think I do sorry as I always used with hoses internally. There is also a little hole beneath the right bar which I assume is to do with di2 memory/junction box. I'd just get some Sugru and shape it to fit 💪

Next up. Dura Ace 9001 levers. Not sure if these are the versions that chewed up inner cables or if I managed to attach all cables carefully.

But, for the rear mech the cable did get slightly frayed (at the lever end). This took about 4000 miles (accorsing to my Strava) and 2 or 3 Rapha500 attempts along with lots of other winter/summer riding with minimal cleaning.

As they are, they work well. Only 2 things to note is that ine of the levers had some chips in the paintwork. So when I bought em I applied some laquer (again, from daughters make up drawer) and it's still intact and protecting the levers well.

Think they're carbon underneath. They have the gorgeous ti clamps intact 😊

£70 posted for the pair (oh, and the rubber on one of the hoods ia bit of a pain... it's ripped!!).

Oh... and one of the covers that holds the brake cable undeneath is well and truly scuffed - at two points.

4 Attachments

Wheel dropped to £30 ONO posted.

Brakes dripped to £60 posted.

Bars removed.

Front wheel now free if anyone wishes to ride it to it's death. Won't come with tyre and tubeless valve though, sorry. Can include a frèe hardly used Giant Garvia tyre with it though.

Postage at cost pls.

Carbon bars sold pending payment.

Bars no longer available.