After hoarding this frame for a while I've decided it's time to pass it on.
I bought it in summer of 2020 and rode it for about 7 months, but only accruing 2,500km on it.
An insanely carbon light frame. The frame weighs in at 750g and fork is about 300g. So it's very possible to build this up as a sub 7kg disc bike.
It's in excellent condition, never been crashed and always well looked after. With a beautiful raw UD carbon satin finish it's lovely in the sunlight. Hard to see in photos, so it's worth seeing in person.
Flat mount brakes and thru axles means it's compatible with all modern groupsets and wheels. Although NOTE this is a Di2/SRAM electronic ONLY frameset, it can't take mechanical gearing.
As you'd expect there are a few minor marks to the clearcoat, but nothing major and I've tried to photograph them.
(It could do with a new headset after sitting in a box for 3 years, the bottom bearing is pretty seized)
Not pictured but included, C-Bear PF30 (30mm Axle) Ceramic BB, generic seatpost clamp. There is a 90mm stem on there which should be good for someone buying this size.
I'm 5'7 but size down due to short legs and poor mobility, so this should fit anyone from 5'2 to 5'7.
Geometry is here: https://geometrygeeks.bike/bike/focus-izalco-max-2017/ (Shows Rim frame but Disc geo is the same)
After hoarding this frame for a while I've decided it's time to pass it on.
I bought it in summer of 2020 and rode it for about 7 months, but only accruing 2,500km on it.
An insanely carbon light frame. The frame weighs in at 750g and fork is about 300g. So it's very possible to build this up as a sub 7kg disc bike.
It's in excellent condition, never been crashed and always well looked after. With a beautiful raw UD carbon satin finish it's lovely in the sunlight. Hard to see in photos, so it's worth seeing in person.
Flat mount brakes and thru axles means it's compatible with all modern groupsets and wheels. Although NOTE this is a Di2/SRAM electronic ONLY frameset, it can't take mechanical gearing.
As you'd expect there are a few minor marks to the clearcoat, but nothing major and I've tried to photograph them.
(It could do with a new headset after sitting in a box for 3 years, the bottom bearing is pretty seized)
Not pictured but included, C-Bear PF30 (30mm Axle) Ceramic BB, generic seatpost clamp. There is a 90mm stem on there which should be good for someone buying this size.
I'm 5'7 but size down due to short legs and poor mobility, so this should fit anyone from 5'2 to 5'7.
Geometry is here: https://geometrygeeks.bike/bike/focus-izalco-max-2017/ (Shows Rim frame but Disc geo is the same)
More photos here: https://photos.app.goo.gl/xfFR6pvWnzhBgANQ7
I also have some photos of it built for reference, if you want to see those let me know.
When the bike came out it was £4,000 with Ultegra Di2
So I reckon £600 is fair for the frameset, although open to offers
I can ship in a frame cardboard box at your cost (can get a quote), but collection in SE1 is preferred.
If you have any questions, shoot me a message!