You are reading a single comment by @Titch and its replies.
Click here to read the full conversation.
-
Is it a standard size that I can get from a local hardware store or do I need an 'official' Shimano screw?
A standard metric flat point grub screw will function
-
My brain is fried from internal routing through a Deda Superbox stem... looks nice and clean, but that's going to be a nightmare when it needs servicing again!
Spare a thought for my internal routing - I have to unsolder and resolder a couple of wires! Figuring out how to get from the middle of the stem to the middle of the steerer nearly did my head in.
gbj_tester
Kimmo
@Titch
Ive just finished a rebuild from mech to di2 (R8050/8070) and found that the second hand front derailleur has a rounded high limit screw. Is it a standard size that I can get from a local hardware store or do I need an 'official' Shimano screw?
My brain is fried from internal routing through a Deda Superbox stem... looks nice and clean, but that's going to be a nightmare when it needs servicing again!