-
What considerations do I need to take to convert these to track?
Your link goes nowhere. In general, converting road wheels to track goes like this:
Front QR - Allen key skewer or bolt-on conversion and you're good to go.
Front through bolt - if it's 6-bolt disc, you need a lathe and suddenly you have a lovely rear wheel
Rear cassette hub - forget it, it's cheaper and simpler to get a whole new wheel**24h rims can be rebuilt onto a Novatec track hub if you want the conversion to be permanent, but buying a track wheel and selling the road wheel is the idler's optimum.
gbj_tester-
Thanks - thinking about it, given they are both thru axle centre lock then I would want to rebuild with track hubs (and thanks for the heads up on Novatec).
Now with working link: https://www.sigmasports.com/item/Vel/85-RSL2-Carbon-Tubeless-Disc-Wheelset/STIG?s=1
onyerbike
I have a set of these deep section road wheels: https://www.sigmasports.com/item/Vel/85-RSL-Carbon-Tubeless-Disc-Wheelset/
What considerations do I need to take to convert these to track? Can it even be done? Thanks in advance