You are reading a single comment by @lynx and its replies. Click here to read the full conversation.
  • I think I'm going bronze, local wheel place is £70 per wheel but needs bearings removed. I've done it on bicycle wheels is it the same but bigger bearings? and can I reuse as the rears appear to be £50!

  • Have you looked on the vfr forums that list all the bearing numbers and suppliers.

    Might be worthwhile to look at the condition of the swing arm bearings and check the seals and maybe bit of marine grease in there

  • thank I'll have a dig around, unfortunately most forums seem to have moved over to Facebook

About

Avatar for lynx @lynx started