You are reading a single comment by @Nerv and its replies.
Click here to read the full conversation.
-
Did a touch more digging - so if in principle I think I'd be snipping the lights connectors off the XT30 kLite switch bundle, then just rewiring the loose ends to the Supernova lights or a spade connector?
Not sure if you have any experience of the kit as the one remaining doubt I have, is if the wires are different gauges/resistances or standard?
Nerv-
The wires will have different gauges as the kLite cabling is much thicker. At least on the set I have, but note that I have an older set with xt60 connectors.
You can also create a short converter cable using a xt30 connector and the one you need for your light. This way you do not have to cut any existing cables.
Wouter
The connectors used by kLite are not used by others. When you modify these connectors or the rest of your cabling you should be good to go.