You are reading a single comment by @c.h.e. and its replies.
Click here to read the full conversation.
-
New heatwrap, and press the shoe connector a bit so it's tighter?
The little plugs can be annoying. Either they don't go on, or slip off. I have broken off more than one.
c.h.e.-
Yeah I got some today from a baumarkt. Will give it a go
-
Cheers Che and @Grumpy_Git with a little compression and some new heatwrap it worked well and feels more secure.
On another note any good advice for top tube wiring solutions on frames with top tubes like a cross check? I've got it taped underneath the tt but it seems like there must be a neater way?
Would it be dumb/even work to wrap the rear light cable in a spiral around the exposed section of rear brake cable between the braze ons? Would probably cause too much friction I guess.
sorethroat
Anyone have trouble with the Edelux II rear light connection dropping out? I find it bad to keep the shoe connector in the hole on the front light. Back light stopped working now because I think I've worn down the heat wrap too much and it's shorting by touching the metal of the light. The cable just drops out the hole though. Quite annoying. So every time I plug it back it gradually pushed down the heat sleeve/wrap to expose the metal.