• More info / photos please! What height cupboards, how much bigger are the doors too and bottom than the cupboard? I assume that’s what you’ve done - some sort of overhang?

  • See the drawing and photo. We did this in 2 rooms, in 1 of them 2 paxes of 100cm wide just fit in the space to fill so bespoke doors were only necessary to make up the height. In the other room, the space to fill was narrower so the doors are also to cover the width.

    @hugo7 you're right, these doors had edgebanding so I did them in MDF. The laminated ply was for a table top and some shelves which I cut with a chamfer so you do see the edge


    3 Attachments

    • IMG_1720 copy.jpeg
    • IMG_0611.jpeg
    • 211222-3pw pax 01.jpg
  • So when do we get to see the whole house?

  • This is really interesting - I was going to do similar and then a pelmet sort deal over the top as we've got 2.8m ceilings, but this could be an option if we were to level out the ceilings.

  • Excellent, thank you! They look great and it’s a much better idea than wasting space and having a pelmet as I was going to as well.

    can you remember if you bought the pax carcasses without the doors? They seem to come in two versions, but I’m not sure yet whether you can get the “drilled for door hinges” version without also getting doors from them. I think that would be easier than buying the “doorless” version and trying to drill it for the hinges myself.

About

Avatar for meneer @meneer started