This flap on a long 700c 60mm Berthoud is 5 cm from the floor. Not using the ready made hole for the daruma bolt though, but an L-bracket positioned very close to where the daruma would be. If you'd put a bracket on it that pointed backwards and used the existing hole for one of those bolts, the end would be even lower.
Any reason to favour the L bracket over the (usually more discreet) under crown direct mount?
(Has a photo of the full bike been posted before? Looks great!)
Not really, I thought I wanted to have more of the length on the back and use the hole there is with the L bracket pointing back, but that turned out to be a bit too close to the ground this time, so I just flipped the bracket around.
This flap on a long 700c 60mm Berthoud is 5 cm from the floor. Not using the ready made hole for the daruma bolt though, but an L-bracket positioned very close to where the daruma would be. If you'd put a bracket on it that pointed backwards and used the existing hole for one of those bolts, the end would be even lower.