MTB colossal clearout:) Flite saddle XT Hope Suntour XC Pro XTR USE Middleburn etc + mucho freebies PRICE DROP UPDATE

Shimano STX RC MC33 front mechs x2
I have included two of these to give peeps a choice between clamp sizes as one is 34.9 and the other 31.8mm (may have a bottom pull one somewhere, just ask). Both are in pretty excellent condition with virtually no scuffs showing. Mechanically all's well, no play anywhere and all threads are good.Both are top pull.
£10 each>>>>now £8 each

Shimano STX SL-MC34 brifters
In very good condition except for a few small scuffs. Great working condition, both ratchets click loudly. All threads and pivots are good. For 7 speed setups. BTW I have quite a few other bits of STX same series kit, just ask and I’ll try to find them.
£30>>>>now £25

Shimano STX SL-MC40 trigger shifters
In pretty excellent condition, virtually no scuffs showing. Great working condition, both ratchets click loudly. All threads are good. 7 speed.
£17

Shimano STX FC-MC40 front mech
Band on design for 31.8mm seat tubes (should be able to supply shims for 28.6mm ones, just ask). Pretty excellent condition, only some scuffing of the STX logo to be seen. Mechanically all's well, no play anywhere and all threads are good. Slight tarnishing in the chain cage. Adjustment bolts not seized. Bottom pull.
£8>>>>now £5

Shimano DX BL-MT60 brake levers
Four finger levers. Pretty excellent condition with virtually no marks showing. All threads are good and pivots have no play. One of them still has it’s adjust reach sticker on it, but the other hasn't.
£20>>>>now £15

Syntace seatpost quick release clamp
For camping 34.9mm seatposts. Has a few noticeable scuffs near the qr pivot but still pretty tidy looking.
£7>>>>now £5

Shimano XT SL-M092 brifters.
In pretty excellent condition except for one or two tiny marks. Great working condition, I’ve rebuilt the left shifter pod due to it being quite gunked up and it now works perfectly, both ratchets click loudly. All threads and pivots are good. For 7 speed setups.
£50>>>>now £40

Ritchey Vantage Sport 26" wheelset, Shimano XT FH-M730/2 hubs
Vintage Ritchey Vantage Sport 26" wheelset. Ritchey rims laced to XT hubs. Neither hub has it's original skewer, both are ones that looks similar but rear is actually a Suntour one and front is a Shimano copy by Avenir.
For 7 speed cassettes (hub is also compatible with 8 speed freehub bodies), and fits Ultraglide or Hyperglide ones. Hubs spin well. Rims are true. Freewheel clicks loudly. One or two marks around the wheels, but pretty excellent otherwise. The rims show staining from the pads but virtually no actual wear (see closeup pics). I've serviced both the hubs and the front's bearings are perfect. The rear's left hand cone is perfect although the right is starting to show wear but is minimal and still spins sweetly. The rims have been destickered but I strongly believe they're Ritchey Vantage Sport due to the distinctive slightly v shaped profile and the fact that IMO it's unlikely xt hubs would have been built up into wheels where the rims aren't quality ones like the above.
Approximate measurements:
135 mm - rear wheel spacing
100 mm - front wheel spacing
36h - rim spoke count
£60>>>>now £50

Mr Control seatpost
Carbon seatpost. No scratches to the carbon, although there's slight zigzagging lower down and the branding is pretty worn. There's also scuffs on either side of the cradle 27.2mm diameter. 280mm length from bottom of the cradle to the underside of the post.
£20>>>>now £15

Sachs Power Glide 11-28t cassette 8 speed
This is a rare Sachs cassette, as the majority of their transmission kit worked with freewheels, not cassettes. Used with Sachs' New Success groupset, and has a similarly solid shifting feel to that of the classic Sachs blocks, with the bonus of being lighter.
Very little used cassette, see close-up pics showing virtually no wear, with the only signs of it being dulling of the ano finish of the steel cogs. Fits Shimano freehub bodies. There are no performance issues when riding. Works fine with Shimano setups.
£25>>>>now £20

Ritchey Logic ahead headset
A classic headset. Bearing surfaces show minimal wear with no pitting etc. The headset has been fully serviced with new ball bearings included. Top cap isn't the original Richey one but still looks good. The headset shows a few scuffs here and there but is still presentable. For 1 1/8" steerers.
£15>>>>now £13

ODI grips
Used 80s grips but still look pretty new looking, there's a few scuffs but that's it. Theyre translucent/creamy coloured. Pretty rare ODI grips.
£10>>>>now £8

Specialized seatpost quick release clamp
For clamping 34.9mm seatposts. Pretty clean looking with no scrapes showing. Threads are good.
£7>>>>now £5

Easton grips
Used 90s slide on grips but still look pretty new looking, the ends look a bit frayed (think they're meant to be used with plugs) but that's it.
£8

Orange OX platform pedals
A nice pair of 90s Orange pedals. Bearings buttery smooth with no play. Threads are good. The paintwork looks a bit tired but could be polished up if you feel the need.
£15>>>>now £13

Hope Ti Glide rear hub with non original skewer
Classic hub for screw on blocks. The skewer isn’t original but is a similar blue to the hub. Condition is near excellent with one or two tiny scuffs here and there. No cracks along the flanges as is a common issue with these Hope hubs with ti barrels. Cartridge bearings feel like new and are buttery smooth. 130mm bcd. The hub has the correct spacing for an 8 speed freewheel Nb this hub used to be part of a wheelset with matching front hub, I’m selling this as a wheel, if interested see Ritchey/Hope wheel above.
£25>>>>now £20

Hope Ti Glide suspension front hub
Excellent sealed bearing hub with ti centre barrel. Aside from some cosmetic marks from use/lacing it is in excellent condition, no cracks, and bearings run super smooth. Also, the Hope logo/sticker has worn off and there's a scuff on the top of one of the flanges- see pic. 32 spoke holes.
£25>>>>now £20

Hope Mono front hub
Excellent sealed bearing hub which was a model around at the same time that the Ti Glide models were. Aside from some cosmetic marks from use/lacing it is in excellent condition, no cracks, although the cartridge bearings feel a tad gritty and would benefit from a service/replacing the cartridges. 32 spoke holes. Weighs in at a tiny 75g.
£20>>>>now £15

Club Roost I-Beam ahead stem
Beam/girder design for extra rigidity (needed for stems that are lengthier). Length is 130mm and bar clamp is 25.4mm. For 1 1/8” steerers. Stem has a classy looking matt grey finish. Condition is pretty excellent with only a slight scuff to the finish on the stem’s top side and a mark on one side.
£15>>>>now £13

Tektro brake levers
A good condition set of these levers that look to be from the 90s. Paintwork is pretty tidy with just a few scuffs on each. Pivots have no play and all threads are good.
£7>>>>now £5

RockShox Indy XC forks
Classic 90s forks. Long travel design. Suspension is still very plush with no stiffness. Legs are straight with no damage. Steerer tube is threaded and 1”. All threads are good. The paintwork is a bit tired but still presentable IMO. The steerer tube measured 140mm in length.
£30>>>>now £20

Shimano SL-CT51 thumbies
A 6x3 thumbshifter set. This set is an indexed one where the l/h one is indexed which is a bit unusual when many of these shifters are limited to friction only for the l/h side. The set also has gear number indicators, see the arrow in the centre of the dial. This novelty and the flashy 80s style rugged looking casework makes for quite attractive shifters IMO😊 The shifters are also pretty rare (I’ve only ever seen one other set) and also seem sought after so I have to price them quite highly. Condition is pretty excellent with only light scuffing showing and the shifting action being nice and crisp.
£20>>>>now £15

Shimano SL-TY15A thumbies
A 5x3 thumbshifter set. This set is an indexed one where the l/h one is retrofriction which is a bit unusual when many of these shifters are limited to standard friction only for the l/h side. Condition is pretty excellent with only light scuffing showing and the shifting action being nice and crisp.
£6>>>>now £4

THREAD UPDATE FOR NEW PARTS ADDED
Not everything listed includes full details and pics- to be added shortly.

Tektro brake booster
Think this is a 90s brake booster. In turquoise and in pretty excellent condition although the Tektro branding is a bit faded.
£5>>>>now £3

Shimano XT SQ-M730 seatpost quick release clamp
A quite rare and definitely fun little accessory to pimp your ride. This has the black plastic cover to match the skewers on XT hubs like the one below normally comes with. So it's from the late 80s. And it's actually a nice bit of kit with alloy end nut and QR pivot without the normal attachment nut so it's a bit lighter. The chrome shows a bit of wear though and the rubber o ring on the nut is looking tired but still solid. All threads are good and there's no play in the pivot.
£15>>>>now £13

Shimano XT FH-M732 front hub
Classic 80's hub made a few years earlier than the below XT one. The alloy shell has one noticeable scuff but overall it's very clean looking. The XT logo has faded a good bit but is still visible. Bearings spin smoothly with no play, I've serviced them and they're pretty new looking. 32 spoke holes.
£20>>>>now £15

Shimano XT FH-M737 rear hub
Classic 90s hub in very good condition. Cosmetically it's very clean looking with no obvious scuffs, the XT/Parallax sticker had partly gotten unstuck so I've glued it back down. Bearings spin smoothly with no play, I've serviced them and cones and races look virtually unused on one side and a light circle mark on the other but no obvious wear or pitting. It's a 32 spoke hole hub and OLN is 135mm. The 8 speed freehub body clicks loudly.
£20>>>>now £15

Shimano STX BR-MC32 canti brakeset. Fairly beater condition as the black finish shows wear and tear. All working fine. All threads are good and pivot action has no play. Pads are original and have loads of life left. I've included pics showing two different hanger sets as wasn't sure which one belonged to the brakeset. One has hangers with plastic covers and will come with cables which link it to the brakes. Obvs you can choose the set you prefer. These cantis are compatible with the above STX brifters as they have the correct pull ratio for cantis.
£20>>>>now £15

Shimano STX RD-MC34 rear mech
Very nice condition except for the occasional light scuff here and there Jockeys are original and show little wear. Threads are all good with no seized bits and pivots have no play. For 7 speed setups.
£12>>>>now £10

Suntour XC Head Binder cable stop with headset top nut. Pretty rare and a nice piece of kit. All alloy except for the compact sized top nut which is steel. This cable stop setup is designed to replace your headset's existing topnut with the cable stop taking it's place. There is a gap underneath the stop with exactly fits the compact topnut, then the cable stop goes on top and is clamped in place onto the threads of your fork's steerer. Pretty excellent condition with no marks showing. Threads are good.
£20>>>>now £15

Suntour XC headset, the same era as above cable stop so would work well together. All alloy construction bar steel cones and races set into alloy cups. Excellent condition with no scuffs to the alloy. And no wear showing on any of it's cones or races, they're pretty much immaculate. All threads are good. Not sure what the crown race diameter is but I can measure it if required.
£25>>>>now £20

Lime green ODI grips
This is another pair of these ODI grips I'm selling. Unlike the above clear ones these have had some usage although they cleaned up well and the light colouring they have still looks bright. The obvious damage they have is that the rounded ends have been scraped/cut off. Obviously they can be used with end bungs so the rough edges wouldn't be visible. But it also means that they no longer have their ODI logos.
£3>>>>now £1

Time Alium pedals with cleats
Time Alium ATAC pedals with used cleats
This is the second set of these pedals I'm selling, these have a fair bit more usage than the above ones. Bearings are still buttery smooth and spring tension tight, but wear is slightly visible along the tops of the cleat holding bars. Threads good. Everything adjusts fine.
£20 with cleats or will sell separately for £15 (will also sell cleats separately, they've minimal wear)>>>>now £15 or £10 without cleats

Shimano Exage Country FC-M520 chainset
A nice example of this chainset. There's a few minor scuffs from normal usage, as well as scratch marks near one of the pedal holes from efforts made to remove a stiff pedal. Besides this there's little wear from usage and the chainrings have many more miles in them. The two inner rings show virtually no wear and the outer one isn't far behind. Rings are 48/38/28t. Crank length is 170mm. Threads and tapers are good and all the bolts can be removed
Price: £20>>>>now £15

Selle Italia Flite saddle with ti rails. 80s and excellent condition bar a small rip on one edge. This looks like the plain black Flite saddle but is a slightly more modern version with oval plastic logo on the rear and reflective oval logos on each side. The Flite logos have worn off the nose. The saddle looks to have had an easy life and still gives a firm ride when ridden.
£20>>>>now £15

Rodi Vuelta Airline 1 wheelset with Shimano hubs
For 8 speed cassettes, and fits Ultraglide or Hyperglide ones. Hubs spin well. Rims are true. Freewheel clicks loudly. One or two marks around the wheels, but pretty excellent otherwise. The rims show minimal brake pad wear. Hubs spin sweetly and overall the wheels look to have had very little usage. I can throw in some freebie basic tyres and tubes if required.
Approximate measurements:
135 mm - rear wheel spacing
100 mm - front wheel spacing
36h - rim spoke count
£15>>>>now £13

Shimano LX ST-M060 7 speed brifters
In very nice condition although the black ano finish has a little sun fading. The brifters come with original rubber hoods, one can be seen in the pics but the other has disappeared recently, I should be able to find it and will include. Great working condition, both of the shifter ratchets click loudly. All threads and pivots are good. For 7 speed setups.
£20>>>>now £15

Shimano LX ST-M563 brake levers. These used to be brifters but the shifting pods were damaged and with being pods not fully incorporated with the body of the brifters could be cut off leaving them looking pretty much like normal brake levers. They're 90s levers suitable for canti brakes only. Condition is very good with hardly any scuffs to speak of and the high gloss paint job still looks very shiny. Mechanically they're fine, with no play in the pivots, threads are good and everything adjusts ok with no seized bits.
£10

Selection of freebie bits including; Specialized 1 1/4" top cap; Wake top cap; Marin headset spacer; purple and blue sets of water cage bolts; blue jockey wheel bolt; alloy canti cable hanger similar to ones in above freebie section on the thread; Christophe MTB plastic toe clip sets x2 and various nylon straps some new; various new canti and v brake pads mostly unbranded but all without packaging, Shimano SL-MT36 thumbies (as seen in above freebies section but the one with plastic lever has been replaced and they're now a matching set) friction only, a second thumbies friction set, also previously photographed but now a set; x3 mismatched black MTB bungs, all branded and one is ODI as in existing pics; Freeway Basics (made by Wellgo) plastic/metal cage pedals; Wilko V-type brake pads, Ashima pads, Quad pads- all in original packaging.

Fibrax red cartridge brake pad set. Unused but no packaging. £3; Plastiche Bioslim rubber grips, NOS but without packaging, rubber still nice and supple. £3.>>>>now £1 each

Fibrax/Koolstop brake shoes for canti brakes. £3; Fibrax V-brake pads, cartridge fitting. £3; VP used cleats only compatible with VP pedals they're designed for ie not Shimano's SPD cleat-fitting pedals. Little used condition. Can supply some bolts. £3; Time used cleats plus bolts, little used condition. £3; Barracuda ('Cuda) seatpost clamp, will clamp 27.2mm diameter seatposts. £5; Specialized and GT toeclips (top left, top right in pic), little used condition, virtually no scuffs. £4 a pair.>>>>now everything £3>>>> £1, everything £5>>>> £3, £4 down to £2

Justek saddle. 90s MTB saddle. In nice condition with no scuffs or tears and the stitching is all there and not stained. There used to be logos near the nose on each side but someone has accetoned them off, quite a clean job.
£8>>>>now £6

Shimano Altus BL-C20 brake levers
80s levers suitable for canti brakes only. Condition is very good with no scuffs to speak of. Mechanically they're fine, with no play in the pivots, threads are good and everything adjusts ok with no seized bits.
£8>>>>now £6

Avid Speed Dial 2 SD-2.0L brake levers in orange. 90s levers suitable for V brakes. Also have some Avid v brakesets (one in silver, another in black) somewhere, no pics ready. Condition obviously quite tatty but mechanically they're fine, with no play in the pivots, threads are good and everything adjusts ok with no seized bits.
£10>>>>now £8

Radius brake levers
Pretty sure these are designed for v-brake compatibility. They're pretty new looking, can't see any scuffs on them. Mechanically they're fine, with no play in the pivots, threads are good and everything adjusts ok with no seized bits.
£8>>>>now £6

Onza bar ends in black
These are pretty tidy looking bar the obvious scratches along the outward facing sides from standing the bike against walls etc. They still look presentable though IMO. All threads are good and the bar ends still have their Onza plugs
£5>>>>now £3

SOLD ITEMS
Shimano LX 1" headset
Shimano XT RD-M735 rear mech
Easton grips
Shimano BL-M600 brake levers
Shimano BL-MT63 brake levers
Bontrager saddle
Shimano BR-M760 brakes
Shimano XT RD-M750 rear mech
Shimano XT Deer Head FD-M700 front mech
XT FD-M738 34.9mm band/down pull front mech
Shimano LX ST-M563 brake levers
Shimano STX SL-MC40 shifters
Suntour XCD 6000 pedals
Shimano XT BR-M739 V-brakes
Shimano XT RD-M750 rear mech (no. 2)
Shimano XT SL-M735 thumbies
ODI grips (translucent)
Flite saddle
Brake booster
Shimano LX M571 (top pull) front derailleur
Shimano Deore front hub
Shimano XT seatpost QR
Middleburn chainring
USE seatpost
X-Lite bars

FREEBIES TAKEN
x2 silver canti hangers
x2 26" innertubes
Onza Chill Pill