ignore the supplied test files, they're mostly garbage and weirdly some of the only files i've had print fails with. just download a 3dbenchy and slice it yourself in bl studio to give it an inaugural print.
then i'd suggest you print out a "purge/poop" bucket to catch the filament waste which gets ejected out of the back of the machine. i like this one...
i'd also suggest a spray bottle of 99% isopropyl alcohol and a microfibre cloth for cleaning the bed before a print as oils from fingers etc can affect adhesion a fair bit if people are touching the surface all the time, might need to check the office fire safety policy for that though.
To piggyback - I’ve got a P1S on the way - think it comes with the textured bed upgrade as mentioned above, and have some IPA. Is there anything else I’ll want to grab so that I can get cracking once it arrives?
ignore the supplied test files, they're mostly garbage and weirdly some of the only files i've had print fails with. just download a 3dbenchy and slice it yourself in bl studio to give it an inaugural print.
then i'd suggest you print out a "purge/poop" bucket to catch the filament waste which gets ejected out of the back of the machine. i like this one...
https://www.printables.com/model/254061-bambu-lab-purgeflushpoop-bucket-for-x1-or-x1-carbo
i'd also suggest a spray bottle of 99% isopropyl alcohol and a microfibre cloth for cleaning the bed before a print as oils from fingers etc can affect adhesion a fair bit if people are touching the surface all the time, might need to check the office fire safety policy for that though.