For sale: Easton bars / Factory 5 stem - price drops

Parts from this bike here (frameset still for sale):

https://www.lfgss.com/conversations/388030

Campagnolo Potenza 11 speed groupset. Includes:

• Shifters (for rim brakes)
  
• Front & rear derailleurs
  
• Chainset 170mm 52/36T
  
• Cassette 11-29T
  
• Can include threaded BB cups if necessary, I think I have both BSA and ITA.
  
• Does not include matching brake callipers, but I can include Veloce callipers if required, see below.
  Very good condition, works perfectly. Some very light rust on some bolts, and brake hoods are ever so slightly worn.
  SOLD
  
  

Campagnolo Veloce rim brake callipers front and rear.
Excellent condition, minimal wear, pads have plenty of life left.
SOLD

Campagnolo Scirocco 700c rim brake clincher wheelset. Campagnolo freehub (remember 11 speed Campagnolo cassettes do work with 11 speed Shimano and SRAM derailleurs).
Very good condition, minimal rim wear, true, hubs nice and smooth.
SOLD

Easton EA70 bars 40cm c-c 31.8mm clamp.
Excellent condition.
£30

Factory 5 Titan stem 90mm. These are quite useful, a quill stem with a 2 bolt faceplate to fit a 31.8mm handlebar.
I think I cut this down a bit so vertical extension is limited - will confirm.
£40

Look Keo pedals, quite well used but perfectly functional
SOLD

(Seatpost and saddle not for sale currently).

Will take pictures of the individual components when I have finished taking the bike apart, might take me a few days!

Happy to consider offers and can negotiate prices if several bits bought together.

Collection in London NW3 / NW5 area, or I can meet more central. Could deliver within a reasonable distance - inside the M25 / north of the river. I would very much prefer not to post for now.

Please get in touch if you have any questions. Thanks for looking!

Dave

1 Attachment

Price drops. Bike is still in one piece but ready to go ahead and split if anyone needs any of these parts!

Hello Dave, I hope you are well.
I may be interested in the campagnolo groupset but I would need to see some more detailed pictures if you don't mind. Thanks

No problem - I will send you a PM!

Potentially interested in the factory 5 stem, depending on if its been cut down

Forgot to add, as part of the group set, interested in the veloce brakes and the pedals too.

I took the stem out to check, and it turns out I did cut it down, as shown. Probably took a few cm off it as you can see - that was previously the minimum insertion mark. I think there is enough length left to give you a couple of cm rise in addition to that shown in the picture of the complete bike.

I genuinely wasn’t sure if I had cut this particular stem - because I ride very small frames, I have done this to lots of stems with no problems. Of course if you need more rise, this might not suit, but it is perfectly fine for a slammed set up.

1 Attachment

Pmed about the wheels

Groupset, brakes, pedals and wheels are provisionally sold, pending payment / collection. Will update!

Dm’d!

If that stem wasn't black and you hadn't cut it down it would've been perfect for me!