Paints not perfect but a great tig welded frame. Could be kept as is or resprayed. Was the last frame I took apart and felt great to ride back to the workshop.
£130 as its 853 but will entertain offers if this is deemed too much. ----- £110
This was handsprayed by previous owner, then helicopter taped and when removing the tape the paint has come off in numerous places. Has a Cinelli BB and the chrome is decent so would def warrant a respray.
£60 for this --- SOLD
TBC - Partially built bikes -
Horizon 70's Reynolds 531 Mixte partial build -
ST- 46cm CTT
TT- 53cm Centre of top To Centre of head set
Spacing - 126mm
Seatpost Dia. - can't remember but prob 27.2mm
Paid too much for this and ran out of time to finish building it up. Would be a great project for someone to build up on the cheap.
——
Ribble Silver Red
ST- 55cm
TT- 55cm
Spacing - 126mm
Seatpost Dia. - 27.2mm
Good quality steel and I believe was 531c if not better. DT shifter braze on burnt off due to stuck shifter I think. Headset good condition!
£40 - SOLD
——
Red Ribble Looks like columbus SLX? based on one I had previously. Tubing seems to be wider diameter than 531 etc. Don't have verniers to check.
ST- 60cm
TT- 59cm
Spacing - 130mm
Seatpost Dia. - 27.2mm
Bit of light rusting in places. Ribble quill stem! Tight clearances from what I remember. Shimano 600 headset still working well
SOLD
Graham Weigh 853
ST- 58cm
TT- 60cm
Spacing - 130mm
Seatpost Dia. - 27.2mm
Paints not perfect but a great tig welded frame. Could be kept as is or resprayed. Was the last frame I took apart and felt great to ride back to the workshop.
£130 as its 853 but will entertain offers if this is deemed too much. ----- £110
Multi Colour Cougar
ST- 55cm CTc
TT- 56cm ctc
Spacing - 126mm
Seatpost Dia. - 27.2mm
This was handsprayed by previous owner, then helicopter taped and when removing the tape the paint has come off in numerous places. Has a Cinelli BB and the chrome is decent so would def warrant a respray.
£60 for this --- SOLD
TBC - Partially built bikes -
Horizon 70's Reynolds 531 Mixte partial build -
ST- 46cm CTT
TT- 53cm Centre of top To Centre of head set
Spacing - 126mm
Seatpost Dia. - can't remember but prob 27.2mm
Paid too much for this and ran out of time to finish building it up. Would be a great project for someone to build up on the cheap.
SOLD SOLD
Daccordi E-Stay MTB -
ST- 48cm Ctc
TT- 55.5cm
Spacing - 130
Seatpost Dia. - quite likely 27.2mm
Paints haggered but in a good way.. fluoro is faded in places but other than that it structurally looks decent! £150 with headset SOLD
Priority goes to anyone who wants the frame and wheels unless someone wants the wheels on their own.
Got one person pretty much taking this pending accurate dims which have been sent.
Cadex -
ST- 44cm ctc
TT- 54cm ctc
Spacing - 130mm I believe
Seatpost Dia. - tbc
Used but plenty of life left, most things seem functional. Perfect late winter/spring project
£100---£90
The above 3 bits are tbc and pending when I can collect them, I have some photos but not great ones atm.
Photos for all frames are here - https://www.flickr.com/photos/196780257@N07/
Photos for all bikes and partially built ones are here -https://www.flickr.com/photos/196780257@N07/albums/72177720315264369
I will be taking photos of the forks tomorrow in daylight once I had a chance to go through them