You are reading a single comment by @seager and its replies. Click here to read the full conversation.
  • I'm doing up a room at the moment and the subfloor is in a pretty bad way - cracked, creaking, or the boards are the wrong depth all together. My measurements are 21.5mm thick, 122mm-ish wide.

    I assume that makes them ⅞" x 5" boards and i'm struggling to find anything reclaimed.

    Reckon I could get away with https://www.wickes.co.uk/Wickes-PTG-Timber-Floorboards---18mm-x-119mm-x-1800mm/p/120831 or would the T&G just mean theres too much of a gap?

    Was hoping to make right for under 50 as it's just an office so I imagine overlaying with ply probably isn't the way to go.


    1 Attachment

    • IMG_7852.JPG
  • You can always knock the tongue off the boards with a saw/knife. As they will be slightly less thick you will need to pack them below to raise them. Plastic packers work well here.

About

Avatar for seager @seager started