You are reading a single comment by @Sig_Arlecchino and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Sig_Arlecchino
young_gun
No papers but bought from the original owner and Rohloff shows it was not previously registered. Got to get some little bits like the flange support rings, disc and a different mounting plate. RE spokes I have to see if they have short enough ones available.
Hub will be going into a 20" wheel. Eventually will be for my cargo bike but may stick it into another bike first as to not take the cargo down while it works. cargo bike currently has front drive and a nexus. Want to update to middrive and rohloff. I have a motor as well (bafang m200) but still need to get a newer batter, screen and can programming dongle to complete all that. Also need to get some motor mounting plates cut for the frame but im still thinking about if its worth the effort vs just leave the front drive or going with something like a bbso1 so as to not have to deal with Canbus things (I also have a spare) but would also require custom motor mount.