-
I had so much good advice about dishwasher fitting too!!
Did you figure out the leg heights? I assumed they would be quite short on a washing machine.
Airhead-
Sort of. I think 15mm plus the adjustment at the hinges should be OK. One of the issues with the door is that the extra bit of ply we added to support the front of the machine raised the door height making it hard to adjust.
I'm going to borrow the vibration pucks from the tumble dryer for the day of install just in case I've fucked up and it needs to be higher.
JL is out of stock, so the actual purchase is on hold pending us deciding what to do next.But at least it's one job down. Altho I stupidly didn't think about writing the exact measurements down so I could get it cut exactly to match. So finding my circular saw in the loft and learning how to use the kreg track thingy is now on my tdl.
hugo7
Just to say thanks for this suggestion as B&Q do small sheets. So I could just get one cut in half. It's a pain when you're looking at the best part of £60 for something you only want a bit of.