You are reading a single comment by @ArthurDent and its replies. Click here to read the full conversation.
  • After a bit more fiddling I managed to get the spool in the right position and fed a cable through. Under tension it seems to be winding in and out when shifting so hopefully it's working again, won't know for sure until it's all connected up on a bike I guess.

  • Ah nice, i had this problem woth one of the later 10s groupsets with the ultrashift that would really do much unless it was cabled up as they changed the mechanism.
    Once on the bike it worked fine but off it i couldn't always get all the gears going up a'd down without any cables.

    @Eeyorecore good to know !
    Ive tried mostly switching out 9s record parts with 9s chorus parts but i guess they were too old to have any compatibility.
    The project was putting a long cage from a mirage onto a chorus body using ti bolts... But even the length of the cage hanger bolt wasnt the right length...

About

Avatar for ArthurDent @ArthurDent started