You are reading a single comment by @si_mon628 and its replies.
Click here to read the full conversation.
-
Boom, no messing around! Looks great. Did you just use a straight edge of some kind to guide the router in the middle of your uprights?
si_mon628-
As I did the back first, for the long rout I used one of the other pieces of ply, and for all the others I clamped a long spirit level.
@JonoMarshall Yep - using a band clamp https://www.screwfix.com/p/band-clamp-4m/1024V
fredtc
an update on the shelving.
18mm router bits are slightly hard to find but otherwise pretty straightforward. not perfect but good enough that i can live with it.
18mm was definitely the right choice and 4mm is more than deep enough.
now to sand it down and finish it