You are reading a single comment by @JanWillem and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
JanWillem
Rodolfo
As I maybe a bit garbled-mindedly stated, my in practice unproven measurements showed I need a 125mm axle for it to fit with a bsc30/bsa30 BB.
I believe the Raceface ones are best, have read bad things about the Rotor one.
I ended up with an aliexpress one.
It might work with the 119mm axle; I'ld try it anyway. But do get a 30mm
springwave washer for the driveside, it gives some wiggle room to get the preload right.