Some more bits to clear out. Hubs, Stems, BB, Headsets etc.

Updated with some newer bits, pictures at the bottom of the thread. Delivery in London. Collection in Bow.
Kawasaki MTB stem 1 1/8 steerer, 25.4mm clamp, 130mm, slight positive rise. £10
Campagnolo lockring, 33.5mm x 24tpi reverse thread. Compatible with Campagnolo, Miche and Phil hubs. New in box, £10
Deda Superzero stem. Black/red, 90mm, 31.8/ 1/18, -8 degrees. £30
Funn Full on riser bar, 25.4mm slight rise and sweep, 750mm uncut. Rare bars, little beat. £15
Kalloy in-line 2-pin silver seat post. 27.2mm, 350mm. Similar to Thomson post. £15
Boardman Gravel drop bar. Slightly flared, 420mm width. Compact reach. £10.
Aluminium road rim brake fork. Originally from an early 90's Concorde road bike. 1" threaded, 170mm steerer, 32mm thread, 26.4mm crown. £10

Sold: Surly track hub set. £30
Sold:Restrap horizontal straps. New with packaging. £20
Sold: Tange Levin NJS headset. 1" threaded, 26.4 crown. New and never installed. £15
Sold: Sram GXP BSA bottom bracket. New in box. £20
Sold: Deda Zero a-head stem. 1 1/8 steerer, 31.8 clamp, 80mm, 8degree. VGC. £10

2 Attachments

Deda Stem

1 Attachment

Kawasaki stem and Campag lockring

4 Attachments

Tange Headset

1 Attachment

Sold: Surly Track hub set. Front 32h. Rear 32h Fixed/SS with lockring. 100/120 spacing f/r. £30.
Track nuts are brand new.
Used, rebuilt with new bearings and thoroughly cleaned.
Some scratches and pitting from previous build.
Could also be built on request with additional cost for rims and spokes.
East London collection or central delivery.

1 Attachment

Pmd about hubs

Yes, I messaged back.

Just in case: 2nd in line for the hubs.

@pienol they're available.

Pm about the headset

3 Pm'd dibs on Tange headset in this order.

1. @Tonts
   
2. @pienol
   
3. @Edavies94
   

Pm dibs on straps,
@pienol

A note for the Levin queue, very low stack height on these so if you have a lot of steerer thread showing you’ll need more spacer than most headsets.

@Skülly Thanks for the heads up.
After measuring, I feel that roughly 30mm combined stack is pretty average and having installed a few of these before, I have not encountered this issue.
If it was an issue, I would have my eyes on the fork as threaded forks can be cut down very easily with the appropriate guides.

Hubs and restraps sold to @pienol. Paid and collecting next week.

Headset Sold, packed and shipped to @Tonts

Dibs campag lock ring:)

@bimu noted.

Dibs GXP BB and Deda stem but unable to say when I will be able to collect, will PM when I can confirm collection if that's ok

Thanks!

Noted @Snoopydope

Aluminium fork. 25.4, threaded, 26.4 crown, 170mm steerer, rim brake.

4 Attachments

Boardman gravel bar.

3 Attachments

Deda Superzero stem

2 Attachments

Kalloy Seatpost.

4 Attachments

Funn Riser bar

3 Attachments