You are reading a single comment by @M_V and its replies.
Click here to read the full conversation.
-
Yeah, hold on, I took a photo…
This is where I ended up with the ‘tray’ the bike sits in slid 100mm further forward of the bracket with the arm than it’s meant to be.
The instructions for swapping the bracket/arm to the other side show that there should be 250mm from the edge of it to the end of the ‘tray’ But at that the wheel was right off the end and I couldn’t get the strap around it without sliding the black bit that holds it right off the end too.
I looked at the instructions for the 598 and noticed there’s no such measurement given.
It’s not like moving the bracket further back along the ‘tray’ changes where the weight is sitting or anything, that’s all set by the arm.
2 Attachments
-
M_V
snottyotter
Mine is 1328mm, are you sure you've adjusted and slid everything as far as it can go?