the one hole that's off is I believe l like 1mm. So I'm assuming that a little bit of play in a ring with the narrow Campy bolts could totally work.
Yes exactly, as you can see below, just slightly outward than a standard 110 bcd, but i used a chainring bolt and it works perfectly and it holds just fine !
ps. yes i did change the bearings and add the other bolts of course ;)
@ArthurDent started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
the one hole that's off is I believe l like 1mm. So I'm assuming that a little bit of play in a ring with the narrow Campy bolts could totally work.