You are reading a single comment by @gbj_tester and its replies.
Click here to read the full conversation.
-
I used a long screwdriver to try and wiggle it out with no luck
A spoke has the flexibility and the hook required to pull on it at the right place and in the right direction
gbj_tester-
No spare spokes but I made this *it’s so twisted nvm I can’t straighten it out any further. I don’t have the hand strength :( I think I was able to bring up some combining hanger wire and a quick release skewer. Now I’m using a longer skewer but it is firmly stuck in place. Give up the fight and buy a new compressor piece(?)**vicious cycle
sergioflorez
Help! I removed a topcap to install a shim and 1 1/8 stem only to realize I made a piece of the compressor(?) get stuck in an angle inside the carbon fork. I used a long screwdriver to try and wiggle it out with no luck. The local bike shop might be my next stop tomorrow