• Surly Long Haul Trucker 54cm
    Cane Creek 40 headset
    Tektro front canti hanger
    Surly seat clamp
    Fabric scoop? not the Brooks Swift shown

    Thomson X4 26mm hidden clamp (rare)
    Surly Open bars 40mm rise 666mm width
    Shimano BL-R550 levers
    SLX (M670?) triggers (2/3x10) switch underneath left shifter to change between 2/3 if you wanted to put a triple on
    BMX grips / Brooks bar ends

    SRAM Rival OCT (GXP) 175mm 110BCD + GXP BB
    SRAM Powerglide CX 46/36T
    DMR V8 pedals
    SLX (M675?) front derailleur (2/3 speed)
    SLX (M675?) rear derailleur mid/long cage
    Tektro CR720s with Koolstop salmon pads
    Deore XT (M780) hubs laced to Ryde Big Bull rims (Sapim leader or strong spokes)
    Deore XT 11-36T cassette
    Schwalbe Marathon Plus 26x2.0” (Just ordered new pair at £70, will fit before collection)
    SKS 65mm chromoplastics w reflector and raw mudflaps with reflective stripe (shown covering 2.25”)

    I also ran this with 650b wheels and some Avid V-brakes which I filed slightly to move the pads up high enough. I can include these if interested. Also have 3 or 4 Continental tubes (26”) I can chuck in.

    I sprayed the frame with waxoyl when I got it. It’s never been left outside. I have spare bottles of touch up paint. Wheels built during lockdown and have probably seen 500km maximum. No dents to the frame. Fairly indestructible frame & build, ready to go wherever!

    46/36T I found quite useful around town and for general use, with a 36T in the back.
    26-111 gear inches, probably want a lower gear if you’re off touring.

    £sold

    I would like to keep the Nitto M12 and the Surly Nice racks for now.


    4 Attachments

    • 71398836931__E83D2F40-26D9-4D41-8E68-6EC6FB08546B.jpeg
    • IMG_4362.jpeg
    • IMG_5688.jpeg
    • IMG_5570.jpeg
About

Avatar for packet @packet started