-
• #6452
I'm guessing width of the seat. I have three of them already on three different bikes all bought off eBay/here and 3mm is within the margin of error of my ability to measure. 131 was out of stock when I ordered.
-
• #6453
It's great, isn't it?
-
• #6454
I almost ordered set on the alloy 650s last night for £50ish luckily I checked my bank account first. Lalalala…
-
• #6455
Went for the Orra's after much deliberation. Think this thread gave me the FOMO to push me over the edge, how average can they be for less than the price of a single LB rim.
-
• #6456
i did too let's see if they turn up with candy
Now ....who has a frameset that accommodates 650b wheels ?
-
• #6457
This is the first bike I’ve ever built from new parts. Slippery slope
-
• #6458
It's my partner's "road" bike. Fancy one with ISP and dampers and shit but a few years old so it was cheap
-
• #6459
Brexit sucks.
I could actually use some bargain wheels (maybe?) and they are all quite normal priced over here. -
• #6461
Yeah, saw that. I'd quite like to reorder and send mine back for a refund but I think there's a risk I could end up with no hubs and no refund if they go bust or the parcel gets delayed.
The straight pull rear is down to £30 if you want to save a little bit of weight but annoyingly the matching front is still £35 instead of £15
The straight pull SR1D is the one in the Attaquer wheelset which is 1450g, and the J bend SR2D is in the Baroudeur wheelset which is 1700g. My J-bend set are 407g so I expect the straight pull would be 300g and then a few g saved in the spokes?
Edit: For reference the centerlock DT Swiss 350 straight pull set is 362g and 390g for J-bend so maybe not so much of a difference after all
-
• #6462
https://www.chainreactioncycles.com/p/sram-force-etap-axs-hydraulic-disc-brake
Force AXS Left and Right levers with calipers for cheap.
Ignore that the calipers both say front - you can remove the adapter and pop a longer hose on.
-
• #6463
Use the 'contact us about your order' button and ask them to refund the difference. Thats what I've done for the wheels when they went down to £135.
-
• #6464
The OUTLET10 code no longer works on the carbon 650b wheels. It did last night though.
-
• #6465
Someone can have my set if they won’t refund before dispatch…
-
• #6466
Damn. Right is oos when I put it in my basket
-
• #6467
Thanks, let's see if that works
-
• #6468
I've always had part-hoarding tendencies in fairness. Just used to be £2 V-brakes sets instead of carbon wheels.
At this rate I'll have my own Porsche thread in another few years 😥
-
• #6469
I mean.
1 new pair of disc wheels to replace a Wheelset with a ding in the front rim I was going to get rebuilt
And
1 new pair of rim brake wheels to replace a Wheelset with a ding in the front rim I was going to get rebuiltIs reasonable right?
-
• #6470
Superstar delivered my £16 650b rims in less than 24hrs (with free postage on an unnecessarily enormous box). It would cost me that much to post a box that big...this season of discounts is baffling.
But, as i've gone for those carbon ones instead if anyone is keen on a pair of these let me know. Only 420g each.
https://www.superstarcomponents.com/en/ryde-trace-trail-rim.htm
-
• #6471
I've learnt my lesson before; buy first then post... sorry!
-
• #6472
-
• #6473
This feels so dirty.
Message sent.
-
• #6474
I've also asked for this...
-
• #6475
I’ve just had what sounds like an AI generated response saying on this occasion they can’t price match. It’s not a price match….
I remember when you were just a poor student cobbling together bikes from scraps. Now look at what you’ve become.