Yes, but maybe not enough.
You can keep most of the pipework but shorten the white pipe between the two screw fittings (just to the left of your arrow) and lengthen the black pipe at the back. It looks like that would only save you a couple of CMs though.
Or you could use something like this to replace the lot.
That’s the first one I googled - “low profile sink waste” or “low profile sink trap” so that might not be perfect but you get the idea
Oh amazing. Will grab on of those from Toolstation. Thanks!
@fredtc started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Yes, but maybe not enough.
You can keep most of the pipework but shorten the white pipe between the two screw fittings (just to the left of your arrow) and lengthen the black pipe at the back. It looks like that would only save you a couple of CMs though.
Or you could use something like this to replace the lot.
That’s the first one I googled - “low profile sink waste” or “low profile sink trap” so that might not be perfect but you get the idea