Original Planet X Kaffenback Frame & forks. 42cm C-C. Circa 2006.

Planet X Kaffenback frame & forks.
Old review here from 2006:
https://www.bikeradar.com/reviews/bikes/road-bikes/planet-x-kaffenback-review/

£35 collected from Ealing W5.

Photos:
https://photos.app.goo.gl/9eKCFc9iyHaP7uKu5

Average condition with plenty of marks and some surface rust in places. Frame is straight.

However the seatpost is stuck. I have quickly tried to remove the post using a softwood block & emery cloth in a vice, but it didn't budge. I clamped it up high by the saddle clamp hence the anodising has been "sanded" off by pulling/twisting action. Pretty sure it will come out with a slide hammer/impact driver, straight pull jig (like the seatpost man) or with caustic soda (damages paint!), but I just don't have the time as we're getting close to moving house! :O

Size:
420mm seat tube C-C
482mm seat tube C-T
520mm top tube C-C
92mm headtube
130mm wide dropout spacing
68mm BB shell
Rear frame clearance for tyre (max) 65mm - approx
Front fork clearance for tyre (max) 50mm - approx

I have the rest of the headset somewhere too, if I can find it!

Shout if you have any questions.

Ta!
Tim

Stupid question - 26" wheels or 700C??

So sorry for the delay. No notification that I had a reply :( ???

Not a stupid question as I didn’t state it!
700c! :)

Thank you, I did assume 700C, but you never know :)

Do you still ahve all the bits from the seatpost top - cradles, etc??

Just trying to work out when I'm next up in London now (Bristol based normally)

Yes still have the cradles and bolt. Not 100% sure where they are at the moment as we have stuff all over the place from getting ready to move. Will be moving to Cardiff area mid December all being well...