Wanted: Wheels manufacturing 30mm bearing extractor

Looking for this particular tool if anyone has one ? (Need to remove bearing from BSA30 BB where the inner bearing is flush with the cup lip so other extractors don't work )

Thanks

1 Attachment

If you're anywhere near SE9, I've got one of these which should work. Have used it on a Hope BSA30 with no issues

Thanks for the offer, in Bristol though! Out of interest is that an eBay / Amazon purchase ? Wondering if it might be a better investment if it has different sizes

And do the pullers rely on a lip to fit behind the bearing? Mine (Rotor) really doesn't have any space

Cheers

Sorry, didn't see your reply! Yeah I think it was eBay. I've used on bearings that have no real lip (recently a tricky freehub bearing with a spacer tube, no lip to get behind it) and it popped it right out.

I've just bought a "bearing pro tools" one for 30mm. I'm in Bristol, welcome to borrow it once I've used today or tomorrow. Doesn't need a lip.

https://www.bearingprotools.com/products/bottom-bracket-bearing-puller-expanding-type

Thanks for the offer, I've already ordered the wheels mfg tool, much appreciated though. Also ordered one of the bearing pro tools for my for hub bearings. Cheers

Thanks, might look into these for future bearing needs!

For anyone interested, this is how I'm planning to use the Wheels mfg tool, already have the press, which you can buy on Amazon

https://youtu.be/ymn5-dN-jVM?si=a8Luoevy8WABdv2v

Just used it and it worked fine. A bit awkward to get the bearing off the tool afterwards but suspect that will be similar for most expander type tools.

Did you buy this one or the one you posted a picture of? Looks like the one you posted needs some additional parts.

EDIT: looks like you've got it sorted, left the above paragraph in as it might help someone else

I bought the one I posted the photo of

https://www.bikeparts.co.uk/products/wheels-manufacturing-30mm-bearing-extractor-set?currency=GBP&variant=36982856024221&utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&stkn=a894e8283159&gclid=CjwKCAiA9dGqBhAqEiwAmRpTC2D_59tf0uYOr3B8MC4KPcrKCelEy07AEDsqv5ce0blgD6hqGEOV9xoCue0QAvD_BwE

Paired it with this press, which I already had, but it's the same one in the video I posted :

Lixada Bicycle Bearing Press Kit Bike Bottom Bracket Install and Removal Tool Kit Bike Bottom Bracket Remover for BB86/BB30/BB91/BB92/PF30 https://amzn.eu/d/1gHNJgP

It's an expensive solution but prefer pressing to hammering or pulling.