You are reading a single comment by @gbj_tester and its replies. Click here to read the full conversation.
  • I have a Lynskey Peloton ti frame, with Ultegra 6800 inc short reach brake callipers.

    I have been running 23mm Durano Plus since I built it but fancied putting 28mm tyres on it as we plan a move to the country and more rural miles.

    Fitted the 28s and they don't fit - they connect with the bridge of the brake calliper.

    So, question.
    What is a decent solution here?
    Are there brake callipers that can accommodate wider tyres? (there must be, surely)
    Are there matchy matchy Ultegra brake callipers that will do the job?

  • Are there brake callipers that can accommodate wider tyres?

    The problem is not the calipers, it's where they're mounted. BR-6800 will clear a 28mm tyre if the frame/fork is set up to exploit the full 51mm reach. Factory spec is 25mm, which will be at the minimum reach. BR-R8000 takes 28mm tyres according to the same Shimano specification standard.

About

Avatar for gbj_tester @gbj_tester started