You are reading a single comment by @Nef and its replies.
Click here to read the full conversation.
Nef-
It's probably out too far and being held in place by cable tension, pull the black plastic part up to check, but you'll likely need to do as said and dial it in (with some pressure on it to get it restarted in the threads) then pull through more cable at the clamp, it might be easier to do all of this with the cable unclamped and out of the way, the threads may be damaged.
snottyotter
Screw jt back in all the way, unscrew by 1 turn, release and readjust brake cable?