You are reading a single comment by @Nef and its replies.
Click here to read the full conversation.
-
Don't use a brake for a TT anyway 👍
(Sorry no helpful answer)
-
Release the pinch bolt, apply wd40 to the hinge plate, open and close until it’s worked loose, re-clamp cable. If that doesn’t work, loosen cable pinch bolt, apply wd40 to hinge, use a good Allen key to loosen the bolt holding the hinge plate a bit but not entirely, open and close clamp to work it loose, re-snug bolt, and reinstall cable.
-
Buy my Tri rig brake
branwen
Leshaches
onyerbike
@Nef
The quick release on this DA calliper doesn’t want to flip all the way down, I loosened the Allen bolt on the front but the cable clamp still won’t rotate freely. Any ideas?
2 Attachments