So I managed to do this somehow (photo). Guess I’ll be needing some new cranks (£10 Chinese pedals are unharmed). I’ve never really understood bottom brackets - these cranks are shimano non-series R563/R565, so will any shimano 5xxx cranks do the job?
If you wind the pedal in from the other side of the crank you can sometimes clean out the thread enough for it to be good again. That pedal is in at such an angle that it probably has don’t too much damage. It’s not like the whole thread has been cross threaded.
So I managed to do this somehow (photo). Guess I’ll be needing some new cranks (£10 Chinese pedals are unharmed). I’ve never really understood bottom brackets - these cranks are shimano non-series R563/R565, so will any shimano 5xxx cranks do the job?
Many thanks for any advice,
Dan
1 Attachment