You are reading a single comment by @user67526 and its replies.
Click here to read the full conversation.
user67526-
well that will happen when they turn up with the right windows, they looked great but they were all face fix not reveal fix!?? all this after i had an in depth conversation with the surveyor about how the sample of extrusion i sourced from the factory with no wooden mounting was going to work in each REVEAL to allow the windows to spin and measuring each noggin fixed in the insulation for them to mount to checking they were all level.
FFS...
Mr_Smyth
we are having some installed tomorrow. Granada units installed by SE Glazing, they were the slimmest we could find and are not having the wooden subframes, powder coated RAL anthracite (matching our Crittall windows)and with Pilkington Low-E glass. 5 windows, one of which is 5 pane horizontal slider 4.9m wide another a corner lift out with opening sash, rest are 3 pane sliding horizontals to match existing mullions. think it was £7k all in.
you have to get googling for the glass spec as there are many options in coatings/stadep sound laminated and widths etc.
The factory in Sheffield were very helpful and sent me some extrusions of the frame so we could work out where to install them and allowing the centre tilt windows to fully rotate without hitting the frames.
I guess i’ll update tomorrow...