You are reading a single comment by @Grumpy_Git and its replies. Click here to read the full conversation.
  • That was my understanding of the regs.

    The conduit is retained against the wall with screws and a few dabs of adhesive around and inbetween.

    I'm now regretting the adhesive given the section that has come proud of the wall. I'll have a look at it once bedtime is over.

    @bluehuw -

    as painter I'd want that 10mm below the existing level

    The room is getting skimmed by a plasterer first. My understanding is that'll be c.3mm

    Overall I'm thinking about ripping it all out and using capping instead. My hope was that the conduit would make things easier and also allow for say a CAT cable in case we ever wanted to run a line down the garden. The location of the second socket was planned so that a hole through the wall comes out in a descreate but practial spot.

  • Just run the cat now either to a cavity or a wall plate. That's what I did and some runs still arent terminated, with known loops of cable under the airing cupboard and my daughter's bedroom

About

Avatar for Grumpy_Git @Grumpy_Git started