I have to cut a section out as some how it's come proud of the wall.
Absolutely brutal. Probably coming up to 4hrs. With over an hour clearing and setting up with lots of protection on the floor and thick dustsheets blocking the rest of the room off. Then worked flat out, only for there still to be more to do.
At least now though though the messy work is done. Now off to take over the childcare :|
I just so wish I'd done this when the floor was up and the rads were being installed. Lesson learned.
Looks neat, as painter I'd want that 10mm below the existing level - I would hope an electrician will give the regs / best practice , if it's proud a decent/fussy plasterer may refuse the job or explain the go around of a high spot wall.. sorry it seems always negative - more dust more work
Oh well. Well see what they say.
I have to cut a section out as some how it's come proud of the wall.
Absolutely brutal. Probably coming up to 4hrs. With over an hour clearing and setting up with lots of protection on the floor and thick dustsheets blocking the rest of the room off. Then worked flat out, only for there still to be more to do.
At least now though though the messy work is done. Now off to take over the childcare :|
I just so wish I'd done this when the floor was up and the rads were being installed. Lesson learned.