Track Crankset to replace my cracked Miche lol

165mm
144 BCD (I'm hoping to reuse my miche chainrings or do i just bin everything with a miche logo now?)
preferably black
kinda interested in a sram s300 or omniums too

Hi there, I’ve got some miche cranks if of interest ?

Which gen crankset?
Both my Primato’s had cracks in them, like most in this thread https://www.lfgss.com/conversations/290595/?offset=150#comment17103255

Just stray away from Miche lol
Square taper, BLB, ANDEL, sugino,
S300s, Omniums
Dura ace
Etc

Miche cranks were significantly redesigned some time ago.

Yup, but now they break in different ways (I would recommend to not relying on anything Miche):
https://www.lfgss.com/comments/17047372/

Oh rly?

That doesn't look like a part or bike that's been taken care of.
If components are inflicted with impacts then they are bound to break. This is the case with any brand, not just Miche. I can vouch from my own experiences with Miche components. Clearly there is a vast divide in opinion.

Haha just seen lots of the negatives about miche but I’ve attached a photo of mine below if interested.

2 Attachments

I have a Campagnolo Record Pista 250€

I have a Planet X (probably Andel) with 42T ring £20

That’s ideal
ANDEL are cheap but cheerful and last
Had mine for 2 years and road daily before the taper rounded off, probably my own fault and the bolt came undone and I didn’t tighten it
Tracklocross, tricks and other abuse and ANDEL holds up

Thanks but a bit outside my budget :)

Hi have you got a pic? is it 165? cheers

Look up stronglight 2000 tracks if you end up buying new, that's what I replaced mine with. Pretty much look the same as the miche but without the crack shitshow

Those stronglights look good thanks.

Found this on eBay that seems like a decent deal 🤷‍♂️ not sure if it comes with the bb though …https://www.ebay.co.uk/itm/195910183093?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=LZ_QZksLSOK&sssrc=4429486&ssuid=fnfS1go8SpK&var=&widget_ver=artemis&media=COPY

That’s a nice deal yeah!
No BB but they are £15 or so on eBay also

https://www.ebay.co.uk/itm/295219519226?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=RFAQS1zITiO&sssrc=4429486&ssuid=hxd0u-tqrg2&var=&widget_ver=artemis&media=COPY

170 I think

How do I work out if that s300 will clear the chain stays on my Cinelli mash sscx 🫣 they’re pretty wide. I had to put a 113mm square taper in there to stop the miche chainring contacting the chainstay.

1 Attachment

With a fixed sprocket, the chainline will be slightly off but might work fine. Would be better with a freewheel.

The guy says it includes the bb…even more enticing

1 Attachment

Or if its a 56cm just give up and sell it to me 😅

🫣 it’s a 53 and I’m never selling it 😂

I know the feeling, I've got one too big and one too small 😵‍💫

Sorry is 172.5 — the old-style 'classic' fluted style, silver. 107 mm UN55 bb also, I'm not sure if it takes this or a 110 mm