You are reading a single comment by @TooTallTim and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
pascalo
gbj_tester
@TooTallTim
Ugh. Got a click on my MTB when putting any power down. Seems to be slightly louder on LH pedal, so I've replaced the pedal bearing and cleaned and regreased threads. It's still there. There's no play in the cranks, preload is correct. BB bearings are brand new, and BB is tight as fuck. Nipped up the crank to axle interface bolt thing (Hope AM crank) and it admittedly wasn't tight enough, but click is still there. Doesn't seem to do it if I stand on just the crank arm, however, so I'm still thinking it must be the pedal somehow. Will swap out the pedals tomorrow to rule that out, but anything else I'm missing? Chain is basically new, cassette is torqued up, axles are greased and tight.
Fucking bikes.